# Tapes

**URL:** <https://www.protaxcommunity.com/t/tapes/724>\
**Category:** Product Suggestions\
**Created:** [April 13, 2016, 3:50am UTC](https://www.protaxcommunity.com/t/tapes/724 "2016-04-13T03:50:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![matthew](https://sea2.discourse-cdn.com/flex016/user_avatar/www.protaxcommunity.com/matthew/32/85_2.png) [@matthew](https://www.protaxcommunity.com/u/matthew)\
**Post date:** [April 13, 2016, 3:50am UTC](https://www.protaxcommunity.com/t/tapes/724/1 "2016-04-13T03:50:31Z")

</div>

I know @Cameron has mentioned in the past that being able to satisfy everyone with the tapes, but generally, I am happy with them.

However:  
The one thing I would really like to see is the ability to set leave the totalled precision at 2 decimals but being able to use as many decimals places in the calculation, specifically multiplication or division.

Is there any chance of adding that in the future?

---

<div class="post-metadata">

**Author:** ![Cameron](https://sea2.discourse-cdn.com/flex016/user_avatar/www.protaxcommunity.com/cameron/32/12_2.png) [@Cameron](https://www.protaxcommunity.com/u/Cameron)\
**Post date:** [April 13, 2016, 4:26am UTC](https://www.protaxcommunity.com/t/tapes/724/2 "2016-04-13T04:26:58Z")

</div>

> [@matthew](#):
>
> The one thing I would really like to see is the ability to leave the totalled precision at 2 decimals but being able to use as many decimals places in the calculation, specifically multiplication or division.

This is still on my list. I looked at this briefly for this year but the change was bigger than I wanted to make mid season. Hopefully we’ll have this addressed before I see you at our Kelowna seminar in November… 🙂

~ Cameron

---

<div class="post-metadata">

**Author:** ![mike](https://sea2.discourse-cdn.com/flex016/user_avatar/www.protaxcommunity.com/mike/32/346_2.png) [@mike](https://www.protaxcommunity.com/u/mike)\
**Post date:** [February 19, 2017, 2:15am UTC](https://www.protaxcommunity.com/t/tapes/724/3 "2017-02-19T02:15:21Z")

</div>

Any update on this – I too would like to be able to set the decimal places to at least 4 periodically, as we could in ProFile?