# Print Settings **URL:** \ **Category:** TaxCycle General\ **Created:** [November 27, 2018, 9:29pm UTC](https://www.protaxcommunity.com/t/print-settings/2049 "2018-11-27T21:29:36Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![snoplowguy](https://sea2.discourse-cdn.com/flex016/user_avatar/www.protaxcommunity.com/snoplowguy/32/2535_2.png) [@snoplowguy](https://www.protaxcommunity.com/u/snoplowguy)\ **Post date:** [November 28, 2018, 9:25pm UTC](https://www.protaxcommunity.com/t/print-settings/2049/2 "2018-11-28T21:25:37Z")
I’m not sure which Module you are specifically referring to, but I had print configuration issues last week when I was setting up forms to print in the T3 Module. This was under Options–\>T3–Print–2018. It seems, once I created my custom configuration, as well as name the print sets, the configuration would not save the settings if I hit “Apply” then “OK” to leave that screen. I found that I needed to hit “OK” without hitting the “Apply” button in order for TaxCycle to save my print settings. Perhaps you can try that. This happened to me a few years back, so I remembered how to work around it. > [@T4 Print Settings Vanishing](https://www.protaxcommunity.com/t/t4-print-settings-vanishing/1014/7): > > [quote=“BertMulderCGA, post:6, topic:1014, full:true”] thanks for the backup method, @Cameron[/quote] Yes… Thanks Cameron, I too have now backed up my options as you suggested. --- _[View the full topic](https://www.protaxcommunity.com/t/print-settings/2049)._